DSX Access System, Inc. WinDSX Instrukcja Użytkownika Pobierz pdf (Strona 3)

DSX Access Systems, Inc. 10731 Rockwall Road Dallas, Texas 75238 / 888-419-8353 / www.dsxinc.com

6/2014

Startup Map

There is a new feature that allows Workstation to

display a Map at startup. This can be used where the

Map is to always be displayed such as on large

monitors in a security office.

To configure this feature, close the program on the

PC where it is to be used. Browse to the WinDSX\

RunData\ folder. Locate the WS_Settings.txt file and

open. Scroll to the bottom where you will find the

entries regarding the Startup Map.

Startup Map Name - name of map within software.

Startup Map Is Maximized - full size of map

Startup Map X Position - starting position

Startup Map Y Position - starting position

Startup Map Save Changes - can be set to YES so

that once the program is running and the Map is

displayed you can move it to where you want it to be.

Once closed, it will start back up in that same

position. You can enable Save Changes, start the

program, position the map, close the program, set

the Save Changes back to No and it will always

come up in the place you specified.

Email Notification

Email Groups are groups of people that will be sent

an email or text message due to a Location,

Device, or Input Alarm. Email Groups consist of a

single or multiple Card Holders that each have a

Time Zone assigned in the group. The Time Zone

selected for each Card Holder determines when

that person will receive the email notification for the

alarm to which the Email Group is assigned.

Card Holders that are to receive an Email

Notification must have an Email Address in a UDF

field that is configured as an Email Address. Email

Groups can be assigned to a Location, to each

Device and to each Input as desired. Those that

have an Email Group assigned will send an email

or text message upon alarm. See the Help on Email

Groups and UDFs.

Before Starting:

1. The Comm Server PC needs to have a

Microsoft® Email Client program configured on it

such as Outlook Express™. It must be configured

as the default mail handler on this PC. This is used

to prove that email communications will work and to

test the port settings required.

2. Test to make sure that you can send an email to

yourself. Then try to send an email to one of the

desired target email addresses from this email

client program.

3. Make sure that the Windows User has full control

over the local WinDSX Folder on the Comm Server

PC where the software is installed.

4. You need an Exchange Server or an ISP such as

ComCast or RoadRunner. You can also use free

email such as Gmail or Yahoo as your email server

if you know what ports are required and your

firewall allows access through these ports. Look in

Help for more information on free email servers and

text messages.

5. To setup up the Email client, this PC must have

the .NET Framework 4.0 or higher installed.

OlMail.exe configuration:

6. In the WinDSX folder on the Comm Server PC

there is a file called OlMail.exe. This program has to

be run once and initialized: Double Click on

OlMail.exe.

A.) Enter the Name of the “SMTP Server” to send

the email through.

B.) Enter the “Port Number”. The default is 25. You

may have to get this information from your IT

department or from your email provider.

C.) Enter the “From Email Address” that will be

used on all email's sent. This is the User Name

from the email provider.

D.) Select “Server Requires Authentication” if the

SMTP Server requires a password. Enter the

Password in the "Password" field.

E.) Select "Server Requires Secure Sockets Layer"

if SSL is required.

F.) Select “Log Command Lines” for trouble

shooting purposes only. This will cause OlMail to

create an OlMail.txt file to be written into the

c:\WinDSX\Errors folder on the Comm Server PC.

WinDSX Configuration:

7. Once the above has been configured it is time to

configure the WinDSX Database program.

A.) Define a UDFName and configure it as “Data is

Email Address”.

B.) Edit or Add a cardholder and assign just 1

email address to the UDF field designated as an

Email Address field.

C.) Create an Email Group and assign it to those

Locations, Devices, and Inputs that you want to

initiate an Email Notification.

For more information go to Email Groups in the DSX

software and Press F1. Then select "Click here for

step by step instructions".

1 2 3 4

Komentarze do niniejszej Instrukcji

Brak uwag

DSX Access System, Inc. WinDSX Instrukcja Użytkownika Strona 3

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie DSX Access System, Inc. WinDSX